Door thresholds

Door thresholds and threshold strips that cover the joint between two floors in a doorway: same height floors, floors at different levels, carpet to laminate and carpet to tile. Anodised aluminium in silver, gold, champagne, black and inox, wood-effect aluminium and UPVC in 18 decors including oak, beech, walnut and wenge, self-adhesive or screw-fix, in lengths from 90 cm to 3 m.

Choose by doorway:

Door threshold guide: types, sizes, fitting & FAQ

Types of door threshold

Aluminium, wood effect or UPVC?

  • Anodised aluminium: rigid and hard-wearing, in silver, gold, champagne, black, inox, brown and olive.
  • Wood-effect aluminium: aluminium strength with an oak, beech, walnut, mahogany or wenge finish to blend with wooden and laminate floors.
  • UPVC: lightweight, self-adhesive and budget-friendly.

What size door threshold do I need?

  • Length: measure the width of the doorway between the door frames. Choose the next length up and cut to size: most profiles come in 90 cm, 1.8 m and 2.7 m, some in 1, 2 and 3 m. A standard internal door suits the 90 cm length; double doors and wide openings need a longer bar.
  • Width: the profile width (for example 30, 35, 40 or 50 mm) must cover the gap between the two floors, plus a few millimetres on each side.
  • Height difference: if one floor is higher, choose a ramp threshold rather than a flat strip.

How to fit a door threshold

  1. Measure between the door frames and cut the threshold to length with a fine-tooth hacksaw.
  2. Clean the floor so it is dry and free of dust and grease.
  3. Self-adhesive: peel off the backing, position the strip over the joint and press firmly along its full length.
  4. Screw-fix: mark through the pre-drilled holes, drill, plug if needed and screw down. Check whether screws are included on the product page.

Door threshold FAQ

What is a door threshold strip?

A strip, also called a door bar or floor trim, that covers the joint where two floors meet in a doorway. It hides the expansion gap, protects floor edges from wear and makes the change between floors safer underfoot.

Do I need a door threshold between two laminate floors?

Usually yes. Laminate needs an expansion gap at doorways, and a flat threshold strip covers it while letting the floor move.

Which threshold for carpet to laminate?

Use a carpet to laminate door bar. It grips the carpet edge and sits over the laminate, giving a neat, secure finish.

Can I fit a door threshold without screws?

Yes. Self-adhesive thresholds stick straight down. For busy doorways, a screw-fix threshold gives the most secure fixing.

How do I cut an aluminium threshold?

Mark the length, clamp the profile and cut with a fine-tooth hacksaw, then smooth the cut end with a file.

Filter

Showing 1–24 of 27 resultsSorted by popularity