SDS mixing paddle

SDS mixing paddles that click straight into an SDS Plus drill, with no chuck and no adapter. Toolty SDS paddle mixers for plaster, mortar, tile adhesive, concrete and levelling compound, in galvanised or powder-coated steel, from 85 mm propeller heads to 130 mm gypsum paddles, in lengths up to 750 mm.

Important: always mix with your SDS drill in rotation-only mode, never hammer mode.

SDS mixing paddle guide: sizes, uses, tips & FAQ

Which SDS paddle do I need?

  • 120 mm head, 600 or 750 mm long: the all-rounder for plaster, mortar and adhesive in standard buckets. Choose 750 mm for deeper tubs.
  • Italian whisk style: for plaster, adhesive and mortar, with a fast, even mix.
  • 130 mm gypsum paddle: for gypsum plasters and finishing coats.
  • 85 mm two-blade propeller: for self-levelling compound and thinner mixes.

SDS paddle or M14 paddle?

SDS paddles are ideal if you already own an SDS drill, because there is no extra tool to buy. If you mix every day, a dedicated paddle mixer with an M14 paddle gives more torque at low speed. An M14 to SDS adapter lets you use M14 paddles in an SDS drill.

Tips for mixing with an SDS drill

  1. Switch the drill to rotation only and check that hammer mode is off.
  2. Put the paddle in the material before starting, and begin at low speed.
  3. Hold the drill with both hands and use the side handle, because the paddle can kick if it catches.
  4. Rinse the paddle in clean water straight after use.

SDS mixing paddle FAQ

Can you mix plaster with an SDS drill?

Yes, with an SDS paddle in rotation-only mode. Keep the speed low for a smooth, bubble-free mix. See also plaster mixing paddles.

Do SDS paddles fit SDS Max?

No. Our SDS paddles are made for SDS Plus, the shank used on most DIY and trade SDS drills. Check the product page if you are unsure.

Can I use an SDS paddle for concrete?

Yes, for small batches with a powerful drill. For larger amounts, see our concrete mixing paddles.

Filter

Showing all 8 resultsSorted by popularity